China Wuhan Kingdrilling Diamond Co.,Ltd company news

MING DTH Hammer Processing defect The hammer piston and cylinder liner are tightly matched, mating length is long, the machining accuracy and surface are smoothness . This requires a very high for cylinder piston and cylinder liner. If the cylinder can not be guaranteed, piston will be intermittentl... Read More

According to the gas distribution method, the DTH hammer can be divided into two types: valve type hammer and valveless hammer. In addition to the different gas distribution methods, the structure is slightly different, but the working principle is similar. valve hammer is less resistant to ... Read More

DTH Button bit and thread bit Application Scenarios Comparison Item DTH Drill Bits Threaded Bits Applicable Rock Formations Medium-hard to very hard rock Soft rock to medium-hard rock (granite, basalt, etc.) (shale, sandstone, concrete, etc.) Drilling Depth Deep holes (up to several tens of meters) ... Read More

DTH Button bit and thread bit working principle Comparison item Down-the-hole drill bit Threaded drill bit Drilling method High-frequency impact + rotation, Rotation cutting, suitable for medium-hard or suitable for hard rock soft rock Power source Depends on the impact force provided Depends on the ... Read More

How to choose the right low air pressure down hole Hammer? In the drilling operation in mining, water conservancy engineering, foundation construction and other fields, low air pressure down hole hammer (usually working air pressure range is 0.7-1.4MPa) is popular because of its adaptability and low ... Read More

The application of down-the-hole drills is very extensive, mainly including the following aspects: 1. Construction: In construction, down-the-hole drills are mainly used for drilling, piling and other tasks. For example, in foundation treatment, foundation pit excavation, bridge construction and ... Read More

Down-the-hole drill is a drilling equipment widely used in construction, mining, tunneling and other projects. Its main feature is that it uses compressed air to drive the drill bit for drilling, which has the advantages of high efficiency, low noise and environmental protection. According to its ... Read More

The main types of drilling systems include rotary drilling, percussion drilling, and rotary-percussion drilling. Rotary drilling involves a rotating drill bit, percussion drilling uses a hammering action, and rotary-percussion drilling combines both methods to penetrate various soil and rock ... Read More

DTH button bits are used for DTH drilling to produce a straight hole or a direction hole with a large diameter. They can also be used to bore into hard and robust rock layers. In this article, we are going to talk more about the DTH button bits and the tungsten carbide buttons used on them. Wuhan ... Read More

What are the advantages of DTH button bit? Wuhan kingdrilling diamond co ltd, manufacturer of DTH hammer, DTH button bit, Overburden casing drilling system, Rollers and so on. Our products are widely used in drilling applications, especially in mining, construction, and quarrying. They offer several ... Read More